Skip to content Skip to sidebar Skip to footer

How To Install Self Adhesive Window Film


How To Install Self Adhesive Window Film. When you need a long lasting, durable look, choose adhesive window film. It is easier to squeegee out air bubbles if you wet the front of the film with your soapy solution before squeegeeing.

One Way Window Film Daytime Privacy Static Cling Self Adhesive House
One Way Window Film Daytime Privacy Static Cling Self Adhesive House from www.pinterest.com

Slowly remove backing and smooth film onto the glass with your hand. This mixture helps the film stick to the window but still lets you slide the film around so you can fit it properly into the corners before the mixture dries. Repeat it without any dirt/blemisheds.

This Mixture Helps The Film Stick To The Window But Still Lets You Slide The Film Around So You Can Fit It Properly Into The Corners Before The Mixture Dries.


Repeat it without any dirt/blemisheds. Self adhesive window film is a quality sticky back plastic which comes in a variety of finishes, and can be used for a multitude of purposes ranging from privacy, decorative, heat and glare solar control, safety and security. Using a good quality window cleaner and a squeegee to remove excess water with help to reduce the risk of dust.

And Then Spray The Glass With Glass Cleanser And Clean With A Absorbent Cloth To Completely Clean And Dry.


Now gradually peel off the remaining protective paper. Carefully measure the glass where the window film will be applied. Lay window film out on flat, clean surface with the paper backing up.

Only A Soft, Damp Cloth, Mild Soap Or Alcohol Is Required.


Apply window film to glass starting at the top. Apply window film to glass starting at the top. Window stick on covering can be ordered by the metre, or cut to your exact measurements using our state of the art cad.

Do Not Remove The Protective Layer Until You Are Instructed In This Procedure To Do So.


Remove backing and apply to glass. When adhesive privacy window film is the desired shape and size, spray the glass surfaces with plenty of water. Begin to remove window film's protective backing.

Never Use Any Cleaner Containing Vinegar Or Ammonia To Clean The Film Or Windows, As This Could Damage The Film.


Place this free area on the wet pane. Fill a water bottle or basin with water and a few drops of dishwashing liquid. 2 wet the glass with a light spray of water and baby shampoo.


Post a Comment for "How To Install Self Adhesive Window Film"